ResMed S9 AutoSet Mode D'emploi page 10

Batch code;
Not for use on more than one patient;
200°F (93°C);
Remove tub to fill;
devices to sale by or on the order of a physician.);
China pollution control logo 2.
Servicing
The S9 and H5i devices are intended to provide safe and reliable operation when operated in accordance
with the instructions provided by ResMed. ResMed recommends that the S9 and H5i be inspected and
serviced by an authorized ResMed Service Center if there is any sign of wear or concern with device
function. Otherwise, service and inspection of the devices generally should not be required during the
five year design life of the device.
Limited warranty
ResMed Ltd (hereafter 'ResMed') warrants that your ResMed product shall be free from defects in
material and workmanship from the date of purchase for the period specified below.
Product
• Mask systems (including mask frame, cushion, headgear and tubing)—
excluding single-use devices
• Accessories—excluding single-use devices
• Flex-type finger pulse sensors
• Humidifier water tubs
• Batteries for use in ResMed internal and external battery systems
• Clip-type finger pulse sensors
• CPAP and bilevel device data modules
• Oximeters and CPAP and bilevel device oximeter adapters
• Humidifier cleanable water tubs
• Titration control devices
• CPAP , bilevel and ventilation devices (including external power supply units)
• Battery accessories
• Portable diagnostic/screening devices
• Humidifiers
10
Catalogue number;
Use distilled or deionized water only;
R Only
x
Prescription only (In the US, Federal law restricts these
Serial number; Direct current;
Maximum water level;
Lock/unlock;
China pollution control logo 1;
93 C Disinfectable up to
Warranty period
90 days
6 months
1 year
2 years