Atag Teppan Yaki TY3011M Notice D'utilisation page 114

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS
installation situation you need to use the following rosettes
so that the temperatures are easy to read. Attention: the
rosette with the
rosette with the
8. Press the rosettes from the front onto the pins.
9. Press the control knobs onto the pins.
10. Lead the control box and the mains plug through the cut-
out in the worktop.
11. Position the control box (E) against the positioning plate so
Kitchen front
50
F
that pin Y falls into hole Z.
12. Use the nuts that were supplied with the product to secure
the control box to the positioning plate.
13. Turn the teppan yaki over and place it in the cut-out.
14. Place the dripping pan into the teppan yaki.
15. Connect the appliance to the mains. The hob is now ready
for use.
16. Check if the appliance works properly.
17. Give the user manual to your client or, if you own the
teppan yaki, store the manual in a safe place.
EN 18
symbol belongs to the front zone, the
symbol belongs to the rear zone).
50
R
contents
"Front"

Publicité

Table des Matières
loading

Table des Matières