Fault Table; Temperature Limitation - Atag Teppan Yaki TY3011M Notice D'utilisation

FAULTS

Temperature limitation

Fault table

Symptom
A slight smell is noticeable the fi rst
few times that you use the grill
plate.
The grill plate becomes too hot
during frying and will not remain at
the set temperature.
The knobs do not show any colour.
In case of an electrical failure, please check all fuses and electrical
connections in your home before you contact the service
department.
When the teppan yaki has been switched on, a sensor
continuously monitors the temperature of the parts of the grill
plate. If the temperature gets too high, the power of the grill
plate is automatically reduced.
Possible cause
Appliance heating
up.
The thermostat has
broken down.
The appliance has
broken down.
EN 12
Fault table contents
Solution
This is normal and the smell
will disappear after you have
used the teppan yaki a few
times. Ventilate your kitchen.
Contact the service department.
Contact the service department.