Built-In Dimensions - Atag Teppan Yaki TY3011M Notice D'utilisation

INSTALLATION INSTRUCTIONS
Before you start
Installation instruction "Front"

Built-in dimensions

330
min. 50
300
cover
box for building in
mounting plate
ø 30(2x)
Read the relevant installation instruction carefully to see if the
conditions for building in the appliance have been met.
Attention: the following instruction applies only to an
installation situation whereby the control knobs are in the
kitchen front, in combination with a "wooden" or "stone"
worktop. See the "Installation situation table" on page 14.
1. Create the cut-out for the teppan yaki.
522
56
490
2. The control box can be mounted on kitchen fronts with a
maximum thickness of 40 mm. Create the cut-outs for the
control knobs in the kitchen front. Use the drawing template
on page 33.
232
141
77
X
X = measurement fr
bottom worktop
135
EN 15
560
min. 50
min. 25 mm
contents "Front"
592
522
56
490
min. 25 mm
135 mm