Sentiotec Pro D Serie Instructions D'installation Et D'utilisation page 82

Instructions for installation and use
Pro D2i/Pro D2i white
Same functional scope as the Pro D2/Pro D2 white, however with further additions:
● Additional output
Either for dimming (up to 500 W), switching (up to 3.5 kW) or regulating the
sauna room temperature via the additional output.
The additional output has no overheat cut-out. For this reason, only intrinsi-
cally safe appliances should be operated using the additional output.
– If infra-red heaters are connected to the additional output, they must
have an overheat cut-out. We recommend using the following infra-
red lamps:
● 1-027-780/ DIR-350-R, 1-027-845/WIR-350-R,
1-027-781/DIR-500-R, 1-027-846/WIR-500-R,
1-027-782/DIR-750-R, 1-027-847/WIR-750-R,
1-027-779/DIR-1300-R, 1-027-844/WIR-1300-R
● 1-027-785/ECO-350-R, 1-027-784/ECO-350-G,
1-027-788/ECO-500-R, 1-027-787/ECO-500-G,
1-027-790/ECO-750-R
– If one of the following infra-red heater panels is connected to an ad-
ditional output, the foil sensor 1-014-445/P-ISX-FF must be used and
activated on the technician menu (see "Activating/deactivating foil
sensor (only Pro D2i/Pro D3i)" on page 40):
● 1-028-348/IR-WP-100, 1-028-343/IR-WP-175,
1-028-784/IR-WP-390, 1-028-938/IR-WP-510
● 1-028-149/IR-WPHL-100, 1-028-941/IR-WPHL-175,
1-028-601/IR-WPHL-390, 1-027-885/IR-WPHL-510
Pro D3/Pro D3 white
The sauna control unit Pro D3/Pro D3 white features the following functions:
● Regulation of combi heaters with a heating output of up to 10.5 kW and
evaporator output of up to 3.5 kW in the temperature range spanning 30 °C
to 110 °C and a humidity range spanning 0% to 100%.
● A power booster allows the maximum switching capacity to be increased from
10.5 kW to 18 kW or 30 kW.
WORLD OF WELLNESS
p. 12/70