3.1.4
Functional description
Threads are cut or turned on workpieces such as pipes or rods in the thread-tapping machine ROPOWER 50 R.
The machine consists of:
-
a drive motor that rotates the centring chuck (7)
-
a clamping chuck (8) for securing the workpiece
-
a pipe cutter (1) for cutting the workpiece to length
-
an internal deburrer (3)
-
a thread-tapping head for making a thread on the workpiece
-
an oil pump that lubricates and cools with thread-tapping oil
-
a tool carriage (4) guided on both sides with a toothed feed
-
a chip collecting and oil trough
-
a safety pedal
-
a coasting restrictor
4
Preparations for operation
4.1
Scope of delivery
When you receive the machine, check
-
that it corresponds to the specifications outlined in your order
-
for damage or deformation attributable to accidents or other causes during transport
-
that all the ordered articles and accessory parts have been supplied.
If you find any deviations, contact the company that sold you the machine immediately or our sales office.
4.2
Transporting the thread-tapping machine
Bend at the knees when lifting the machine so as to protect your back against over-
stressing.
32