Safety Instructions; Risk Of Explosion Or Fire - DeWalt D55250 Guide D'utilisation

Masquer les pouces Voir aussi pour D55250:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
WALT TOOL, CALL US TOLL FREE AT 1-800-4-DEWALT
E
(1-800-433-9258).
WARNING! Read and understand all instructions before operating
this compressor. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS

Safety Instructions

WARNING: Some dust created by this product contains chemicals
known to State of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• compounds in fertilizers
• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated lumber
To reduce your exposure to these chemicals, wear approved safety
equipment such as dust masks that are specially designed to filter out
microscopic particles.
WARNING: Use of this product will expose you to chemicals known
to the State of California to cause cancer, birth defects and other
reproductive harm. Avoid inhaling vapors and dust, and wash
hands after using.
WARNING: This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
The user of the air compressor must understand these instructions.
Each person operating the air compressor must be of sound mind
and body and must not be under the influence of any substance which
might impair vision, dexterity, or judgement.
AIR TANK
The tank on your Air Compressor is designed and may be UM coded
(for units with tanks greater than 6 inch diameter) according to ASME
Section VIII, Div. 1 rules. All pressure vessels must be
inspected once every two years. To find your state
pressure vessel inspector, look under the Division of
Labor and Industries in the government section of a
phone book or call 1-800-4DEWALT for assistance.
The following conditions could lead to a weakening of
the tank, and result in a violent tank explosion:
1. Failure to properly drain condensed water from the tank, causing
rust and thinning of the steel tank. Drain tank daily or after each
use. If tank develops a leak, replace it immediately with a new tank or
new compressor outfit.
2. Modifications or attempted repairs to the compressor tank. Never
drill into, weld, or make any modifications to the tank or its
attachments.
3. Modifications of the pressure switch, safety valve, or any other
components that control tank pressure. The tank is designed to
withstand specific operating pressures. Never make adjustments or
substitute parts to alter the factory set operating pressures.
ATTACHMENTS & ACCESSORIES
Exceeding the pressure rating of air tools, spray guns, air operated
accessories, tires and other inflatables can cause them to explode or
fly apart resulting in serious injury. Follow the equipment manu-
facturers recommendation and never exceed the maximum allowable
pressure rating of attachments. Never use compressor to inflate
small, low-pressure objects such as children's toys, footballs,
basketballs, etc..

RISK OF EXPLOSION OR FIRE

Always operate the compressor in a well-ventilated
area free of combustible materials, gasoline or
solvent vapors. If sparks from the compressor
come into contact with flammable vapors, they
may ignite, causing fire or explosion. When
spraying
flammable
materials,
compressor at least 20 feet upwind from the spray
1
locate
the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

D55251

Table des Matières