Publicité
Les langues disponibles
Les langues disponibles
Bit
Settings 1
29
1 (0)
Direction of motion
0
normal: locomotive drives forwards if the arrow on the manual
control points up.
1
interchanged: locomotive drives forwards if the arrow on the
manual control points down.
2 (1)
Running-notches mode:
0
Operation with 14 or 27 running notches.
This setting is chosen for all digital systems which do not
support the 28 running-notches mode.
1
Operation with 28 or 128 running notches.
This setting is chosen for digital systems which support the
28/128 running-notches mode.
3 (2)
Operational mode:
0
Locomotive only runs in digital operation.
1
Locomotive runs both in digital and conventional operation,
flying splice possible.
4-5 (3-4)
Not used
6 (5)
0
Decoder uses basic address (from CV1)
1
Decoder uses extended address (from CV17 and CV18)
7-8(6-7)
Not used
33
0
E
1
1
0
0
0
Publicité
