Publicité
Les langues disponibles
Les langues disponibles
4
Installation of the LE1035E
These decoders come with a NEM652 / NMRA RP-9.1.1 medium plug.This plug makes installation
of these decoders very simple.
To install the decoder simply remove the dummy socket in your locomotive and install the decoder
plug. To ensure the headlights work properly you must align the plug properly. Pin 1 of the plug
connects to the orange wire. Ensure this is aligned to pin one of the locomotive. If the plug is
installed backwards the lights will not work.
Be careful when installing the plug so that the pins will not be bent or broken.
The pin allocations of the NEM652 plug:
Pin
meaning
1
motor terminal 1
2
function output B (rear headlight)
3
function output C
4
left rail pickup
5
motor terminal 2
6
function output A (front headlight)
7
function positive common
8
right rail pickup
Function output D is not connected to the NEM plug.
wire color
orange
yellow
green
black
grey
white
blue
red
Pin 1
Orange
Plug NEM 652
25
E
Publicité
