Operation - ZUMEX ESSENTIAL Manuel De L'utilisateur

4.2 OPERATION

Operation of models:
• Place a glass / jug under the juice outlet and press the green button or "START"
push-button (Fig. 4), depending on the model. The machine will start to operate when
you press the button.
To stop the juicer, press the red button or "OFF" push-button.
Operation of model:
• After connecting the machine, press the main switch on the back, at the top of the
unit. The "OFF" message will appear on the display.
• To start the juicing process, press the "ON" push-button (Fig. 5), and the "AUTO OFF"
message will appear on the display, indicating that the unit is stopped in the automatic
mode.
• The machine will start automatically when the fruit is placed inside the juicing system,
stopping when the process ends.
• To interrupt the juicing process, press "OFF"
.
• The Zumex Essential Autostart model includes an orange counter to let us know how
many pieces of fruit have been used, by means of a double infrared barrier where the
fruit is placed in the juicing area.
• To view this information, press "OFF" and when the "OFF" message is displayed,
hold the button down until the information is displayed as follows:
Cnt: XXXXXXXX
Where "XXXXXXXX" is the quantity of pieces of fruit that have passed down the
infrared detector, even when the machine is "OFF".
24
All manuals and user guides at all-guides.com
Zumex Essential
Zumex Versatile Zumex Versatile Podium
Zumex Essential Autostart
Operation of models:
• The digital models allow the user to program the number of oranges to be used when
the juicer starts to operate. The system can program up to 9 pieces. The quantity
programmed will be stored in the memory until a new program is saved.
• Programming:
Guide for the indicators on the digital display (Fig. 6):
1. Start button 5. Network connection indicator
2. One more piece 6. Disconnection push-button
3. Increase nº of pieces programmed 7. Connection push-utton
4. Wrong placement of top indicator 8. Partial counter (nº fruit programmed).
On the control panel (Fig. 6), the light will be lit (nº 5), indicating that the machine is
on.
1 - Press «ON» (nº 7) and the partial counter will be lit (nº 8).
2 - Select the number of pieces of fruit used with the push-buttons
and (nº 3 and 9). When you push the button, the corresponding
digit on the counter will increase the number of units. When you
press the button, the number of units will decrease. After the
juicing cycle has ended, more fruit can be used, by pressing «+ 1»
(nº 2). However, this will not affect the program.
3 - Digital models can also squeeze in continuous operation (no
programming required), so that the machine can operate until the
stop button is pressed again. If you wish to use the continuous
operation mode, select "C" in the partial counter (nº 8); the machine
will stop when you press «STOP» (nº10).
• To start the operation, press «START» (nº 1). When the programmed number of fruits
has been squeezed, the machine will automatically stop.
• If you wish to stop the cycle, press «STOP» (nº'bc 10) and the machine will stop
squeezing at that moment, even if the cycle has not ended.
Zumex Versatile D
Zumex Versatile D Podium
EN
For continuous juicing. Set to «C»
9. Decrease nº of fruit programmed
10. Stop button
11. Totals counter
25