Assa Abloy OneSystem 309N Consignes De Sécurité page 18

!
!
EN
18
Warning!
Incorrect or faulty installation impairs personal safety: The normal installation
height for the horizontal push rod (panic bar) is 900 mm to 1100 mm above the
finished floor surface. If children are present in the majority of the building, the
installation high must be reduced accordingly.
The horizontal push rod must be installed such that the greatest possible effec-
tive bar length is achieved.
Any lock counterparts or coverings which are provided should be installed in
order to ensure conformity with this European standard.
Limited movement of the door jeopardises personal safety: All blocking ele-
ments must be installed such that the free movement of the door is not impeded.
Doors may only be secured with the approved locks. No additional devices may
be installed. Any door closers which are installed may not impair the actuation of
the door by children and infirm persons.
Installation
Warning!
Life-threatening danger and risk of injury due to damage: A damaged lock is a
safety hazard. A damaged lock may not be installed and used. The lock and pack-
age may not be damaged.
Life-threatening danger and risk of injury resulting from incorrect or faulty
installation of the horizontal push rod (panic bar) in accordance with DIN
EN 1125: The normal installation height for the panic bar is 900 mm to 1100
mm above the finished floor surface. If children are present in the majority of
the building, the installation high must be reduced accordingly. The horizontal
push rod must be installed such that the greatest possible effective bar length is
achieved.
Life-threatening danger and risk of injury resulting from incorrect installation
of door handle fittings according to with DIN EN 179: Only escutcheons, lock
counterparts, and coverings approved according to DIN EN 179 may be used.
Information