Identification; Scope Of Delivery; Installation; Installation Conditions - Endress+Hauser Memograph M RSG40 Mode D'emploi

Identification

"
24
ESD - Electrostatic discharge
Protect the terminals against electrostatic discharge. Failure to comply with this instruction can
result in the destruction of parts of the electronics.
2 Identification
2.1

Scope of delivery

• Unit (with terminals, as per your order)
• 2 fastening clips
• USB interface cable, length 1.5 m (4.9 ft)
• Optional secure digital (SD) card (card not in device but is supplied.)
• PC operating and configuration software on CD-ROM
• Delivery note
• Multilanguage Brief Operating Instructions as hard copy
• Multilanguage Operating Instructions on CD-ROM
Anything missing? Then please inform your supplier.
3

Installation

3.1

Installation conditions

Working temperature range:
-10 to 50 °C (22 to 122 °F), max. 75% rel. humidity without condensation.
Caution!
• To avoid heat accumulation, please always ensure that the unit is sufficiently cooled.
• Maintain distance from strong magnetic fields (see Section 10 "Technical data", interference
immunity)
• Permitted ambient conditions at front: in accordance with unit ingress protection of max. IP65
(with front flap closed)
3.2

Installation instructions

3.2.1 Mounting tool
To install in the control panel, all you need is a screwdriver.