It Security; Identification; Scope Of Delivery; Installation - Endress+Hauser Memograph M RSG40 Manuel

Identification

24
Symbol
A0011191-EN
A0011192-EN
A0011193
1.5

IT security

We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any inad-
vertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide addi-
tional protection for the device and device data transfer must be implemented by the opera-
tors themselves.
2 Identification
2.1

Scope of delivery

• Unit (with terminals, as per your order)
• 2 fastening clips
• USB interface cable, length 1.5 m (4.9 ft)
• Optional secure digital (SD) card (card not in device but is supplied.)
• ReadWin 2000 PC operating and configuration software on CD-ROM
• Delivery note
• Multilanguage Brief Operating Instructions as hard copy
3

Installation

3.1

Installation conditions

Working temperature range:
-10 to 50 °C (22 to 122 °F), max. 75% rel. humidity without condensation.
CAUTION
!
‣
To avoid heat accumulation, please always ensure that the unit is sufficiently cooled.
‣
Maintain distance from strong magnetic fields (see Section 10 "Technical data",
interference immunity)
‣
Permitted ambient conditions at front: in accordance with unit ingress protection of max.
IP65 (with front flap closed)
Meaning
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation
can result in minor or medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not
result in personal injury.
Tip
Indicates additional information.
ESD - Electrostatic discharge
Protect the terminals against electrostatic discharge. Failure to comply with
this instruction can result in the destruction of parts of the electronics.