Endress+Hauser Memograph M RSG40 Manuel page 28

Wiring
28
4.1.3 Auxiliary voltage output as transmitter power supply for 2-
wire sensors
+
External display
(optional)
_
Sensor 1
Sensor 2
On connecting channels 3-16
see terminal connections Ch1-2
Fig. 4: Connecting the auxiliary voltage output when using as transmitter power supply for 2-wire sensors in the current
measuring range
– External display: e.g. Loop-powered indicator RIA15 from Endress+Hauser
– Sensor 1: e.g. Temperature field transmitter iTEMP TMT162 from Endress+Hauser
– Sensor 2: e.g. Digital pressure transmitter Cerabar M from Endress+Hauser
- +
Y
+
- +
Y
_