Commissioning And Operation; Display And Operating Elements - Endress+Hauser Memograph M RSG40 Manuel

5

Commissioning and operation

5.1

Display and operating elements

4
3
Fig. 6: Device display/operating units
Operating Operating function
element (Item (Display mode = measured value display)
No.) (Setup mode = operating in the Setup menu)
1 "Navigator" jog/shuttle dial for operating with additional press function.
In the Display mode: turn the dial to switch between the various signal groups. Press the dial
to display the main menu.
In the Setup mode or in a selection menu: turn the dial anticlockwise to move the bar or the
cursor upwards or counterclockwise, changes the parameter. Turning clockwise moves the bar
or cursor down or clockwise, changes parameter. Press = selects the highlighted function,
starts parameter change (ENTER).
2 Functions of the LED display (as per NAMUR NE44:)
• Green LED (top) lights up: power supply OK, unit working without faults
• Red LED (bottom) flashes: need for maintenance if unit-external problem occurs (e.g. cable
open circuit etc.) or a message / note to be acknowledged is pending, calibration in
progress.
3 Variable softkeys 1 to 4 (from left to right)
4 Function indicator of the softkey
5 In the Display mode: current group name, type of evaluation
In the Setup mode: name of the current operating item (dialog title)
5 6 7
2
d
c b a
Commissioning and operation
8
9
10
1
31