Taurus White and Brown FF2 Mode D'emploi page 11

pliance by yourself in order to
avoid a hazard.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not wrap the power cord around the appli-
ance.
- Do not clip or crease the power cord.
- Do not allow the power cord to hang or to
come into contact with the hot surfaces of the
appliance.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- As an additional protection to the electrical
supply for the appliance, it is advisable to have
a differential current device with a maximum
sensitivity of 30 mA. Ask for advice from a com-
petent installer.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedi-
ately disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
- Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens or
similar.
- The appliance must only be used with the stand
provided.
- Place the appliance on a horizontal, flat, stable
surface, suitable for withstanding high tempera-
tures and away from other heat sources and
contact with water.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the appli-
ance, this will increase the risk of electric shock.
- Do not use the appliance in the case of persons
insensitive to heat (the appliance has heated
surfaces).
- Do not touch the heated parts of the appliance,
as it may cause serious burns.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance when empty.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to catch it or move
it.
- Do not use the appliance if it is tipped up and do
not turn it over.
- To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
- Do not force the appliance's work capacity.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store or transport the appliance if it is
still hot.
- Do not store the appliance on areas where the
temperature could be lower than 2ºC
- Use the appliance and its accessories and tools
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use the appliance for
operations different from those intended could
result in a hazardous situation.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Never leave the appliance unattended when
in use and keep out of the reach of children,
as this is an electrical appliance that heats oil
to high temperatures and may cause serious
burns.
- Use only utensils appropriate to support high
temperatures.
- If, for some reason, the oil was to catch fire,