Ventilation Systems - SCHUBERTH M1 PRO Manuel

C. THE HELMET
3. Insert the headband padding and begin
clasping the buttons, starting from the
forehead.
Caution:
Never ride when parts of the inner lining have been removed.
Caution:
Excessive heat (e.g. exhaust heat) can cause damage to the inner lining!
Note:
To avoid damage to the inner lining and inner shell, do not hang the helmet
over the mirrors or handlebar grips.

13. VENTILATION SYSTEMS

HEAD VENTILATION
A large adjustable ventilation regulator is placed on the
top part of the helmet shell to allow for ventilation of
the head's surface. The inflowing air is guided through
channels along the top of the head to provide an
effective supply of fresh air. The ventilation regulator
can be moved back and forth to vary the among of
air flowing in and thus regulating the fresh air supply.
Moving the ventilation regulator to its end stop products
a maximum of inflowing air.
52