SCHUBERTH M1 PRO Manuel page 47

REPLACING THE VISOR SHIELD
Changing the face shield is easy to do without tools using the convenient
EasyChange mechanism. To replace the face shield, it is helpful to place the
helmet on a flat surface or on your lap while seated.
Removing the face shield
1. Move the face shield into the
uppermost locked position.
2. Press the spring underneath the face shield
mechanism on one side towards the face shield
opening, then do the same with the spring on the
other side.
3. Move the face shield upwards until it is released
from the face shield mechanism.
EN
45