Retention System; Storing The Helmet - SCHUBERTH M1 PRO Manuel

G. MAINTENANCE AND CARE
1. Slide the ventilation hood towards
the backside of the helmet as far as
possible.
2. Squeeze both sides of
the ventilation hood.
2. While squeezing, slide the ventilation
hood backwards out of its attachment.

5. RETENTION SYSTEM

The metal components of the retention system do not require maintenance.

6. STORING THE HELMET

Store the helmet in the helmet bag supplied in a dry, well-ventilated and stable
place. Always position the helmet so that it cannot fall to the floor. Damage that
occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
62