Switching On And Off - Technogym BIKE FORMA Manuel De L'utilisateur

2.2 Switching on and off

To turn the equipment on, switch the
02258006
switch to the "I" position.
When switched on, a beep sounds and
all the control panel LEDs light up.
After a quick system check and reset, the
equipment is ready for use.
02226011
choose training
The message does not appear if the keys
are disabled (see section 3.12) so that
exercises can be started only with the
TGS key.
insert the TGS key
The message does not appear if the TGS
key reader is not installed or if the use of
the TGS key is disabled (see section 3.12)
so that exercises can be started only with
the control panel keys.
In this mode, the following functions are enabled:
- calculation of heart rate, if measured;
- reading of access codes for configuration menu (see section 3.12).
41
2.2 Switching on and off