Changing The Fuses - Technogym BIKE FORMA Manuel De L'utilisateur

Changing the fuses

Warning
The fuses must be changed by the Technogym Technical Support
Service.
Danger
Before changing the fuses turn the equipment off by switching the
switch to the 0 position and unplugging the power supply plug from
the wall socket.
Extract the fuse holder,
to the left of the switch,
by pressing the lever.
Replace the burnt-out
fuse with one of the new
fuses (3.15 A (F)), as
supplied with the
equipment.
Fit the fuse holder back
into place, making sure
it clicks in properly.
Danger
If no more of the supplied fuses are available, use a certified fuse with
identical electrical specifications (i.e. 3.15 A (F)) for the replacement.
30
Bike Forma - User's manual
02142055
02258016