Disposal; Disposing Of Welding Dust; Disposing Of Materials; Disposing Of Consumables - Abicor Binzel xFUME ADVANCED 115V-CSA Mode D'emploi

Masquer les pouces Voir aussi pour xFUME ADVANCED 115V-CSA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12 Disposal

12 Disposal

12.1 Disposing of welding dust

All welding dust collected must be disposed of in accordance with local regulations.

12.2 Disposing of materials

This product is mainly made of metallic materials that can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labeled in preparation for their sorting and
separation for later recycling.

12.3 Disposing of consumables

Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables' manufacturer.
► Observe the relevant local regulations and disposal instructions in the safety data sheets specified by
the manufacturer of the consumables.
The disposal of dust collecting bags and disposal bags is subject to special waste regulations. The dust must
not enter sewage systems or be disposed of together with normal household waste.
► Observe the local and official regulations.

12.4 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.

13 Spare parts

Tab. 4
Item description
Rotary air nozzle with aluminum pipe (2 pieces)
Filter cartridge (2 pieces)
High-vacuum ventilator (2 pieces)
120 V, 60 Hz, 800 W, max. 1,000 W
EN - 28
Equipment marked with this symbol is covered by European Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
► Do not dispose of electrical and electronic equipment with household waste.
► Disassemble electrical equipment prior to proper disposal.
 11 Disassembly on page EN-27
► Collect components of electrical separately and recycle in an environmentally
responsible manner.
► Observe local regulations, laws, provisions, standards and guidelines.
► Please consult your local authority for information about collection and return of
electrical devices.
Spare parts
xFUME™ ADVANCED 115V – CSA
Item number
601.0241.1
601.0111.1
601.0242.1

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Xfume advanced hp 230-csa

Table des Matières