Programming Menu - Pentair STA-RITE CPS 10 Serie Instructions De Service

3. A - ABSORBED CURRENT
•
Current absorbed by the pump in
Ampere
4. HH:MM - TIME
•
Time
5. COMPLEMENTARY PUMP STATUS (UNIT ONLY)
•
STB" the complementary pump is on
standby
•
"ON "the complementary pump is on
and regulating
The parameter displayed by default is pressure (BAR or PSI); after 10 minutes of displaying one of the other parameters the system
automatically returns to displaying pressure.

5.3 PROGRAMMING MENU

NOTE
The CPS module indicates with the symbol
NOTE
Press the SET button to save the set parameters and exit the programming mode.
NOTE
Press ESC to exit the programming mode without saving any of the changed parameters.
Functioning of the module is programmable using a series of parameters grouped into 4 sub-menus:
MENU
TIME/DAY
SET-POINT
ADVANCED PARAMETERS (LEV.1)
INSTALLATION PARAMETERS (LEV.2)
NOTE
For a correct configuration, we recommend using the "installation" and "advanced" parameters with the machine on STOP
and connected to the power supply.
•
Frequency graph indicator
•
Day of the week
•
"TOP" the complementary pump is
on and is at the maximum possible
frequency
the modification status of the parameter.
DESCRIPTION
To enter the time and day of the week.
To change the system pressure SET-POINT.
To change setting parameters.
To change system setting parameters.
•
Day of the week
•
Frequency graph indicator
•
< Alarm Code > the complementary
pump is in alarm (for a description of
alarm codes, please see Chpt. 6.0)
EN
29