Panasonic PV-GS120 Mode D'emploi page 66

≥When the Camcorder is switched to the PC
Mode while it is connected to the personal
computer, "PC ACCESSING" is displayed on
the Camcorder and the operation mode of the
Camcorder cannot be switched. In this case,
disconnect the USB Connection Cable. Switch
the operation mode of the Camcorder and
reconnect the Cable.
≥If the Camcorder is connected in the PC Mode,
the [Removable Disk] icon representing the
Memory Card drive is displayed in
[My Computer].
≥When the Tape Recording Mode of the
Camcorder is switched to the PC Mode, a
warning message may be displayed. You may
simply ignore it.
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging ON by setting the user name to
Administrator or to a user name having
equivalent authority.
≥If you use Windows 98SE/Me, the message,
"File is not found" may be displayed when the
Camcorder is connected for the first time. Enter
the following paths to complete the connection:
If the message "MTDV98M3.pdr is not found" is
displayed, enter
"C:\WINDOWS\system\IOSUBSYS". If the
message "MTDV98M3.sys is not found" is
displayed, enter
"C:\WINDOWS\system32\DRIVERS".
(The paths will differ depending on the
environment of your personal computer.)
≥If you install the USB Driver while the USB
Connecting Cable is being connected, or if you
do not follow these Operating Instructions, the
Camcorder will not be recognized correctly. In
this case, delete the USB Driver from
[Device Manager] as described below, uninstall
the USB Driver, and re-install it.
1 Set the Camcorder to Tape Recording Mode
or Tape Playback Mode, connect it to the
personal computer, and delete [Panasonic
DVC USB-SERIAL Driver for Win XX
(COM X)] (or [Panasonic Serial USB Driver])
from [Device Manager].
The numeral designation after "Win XX" will
differ depending on the OS. (Win 98,
Win Me, Win 2000, Win XP)
2 Set the Camcorder to PC Mode and delete
[Panasonic DVC SD Disk Drive] (or
[Panasonic DVC USB Storage]) (Windows
98SE).
With a PC
ª About the SD Memory Card and
MultiMediaCard
SD Memory Card
The SD Memory Card (supplied) is virtually the
same size as a MultiMediaCard. It is an external
Memory Card that is available in larger
capacities. It has a write protect switch to prevent
data writing and card formatting, as well as a
copyright protection function.
≥SD Logo is a trademark.
MultiMediaCard
The MultiMediaCard is a compact, lightweight
and removable external Memory Card.
≥All other company and product names in the
operating instructions are trademarks or
registered trademarks of their respective
corporations.
Files recorded on a SD Memory Card or
MultiMediaCard
It may not be possible to play back the files on
this Camcorder recorded on and created by other
equipment or vice versa. For this reason, check
the compatibility of the equipment in advance.
ª About the compatibility of the card
files
Data files recorded on an "SD Memory Card" or a
"MultiMediaCard" by this Camcorder conform with
DCF (Design rule for Camera File system)
established by JEITA (Japan Electronics and
Information Technology Industries Association).
≥If you attempt to play back files recorded with
this Camcorder on other equipment or to play
back files recorded with other equipment on this
Camcorder, you may not be able to play them
back. Please check the compatibility with the
other equipment in advance.
-66-