Settings For Using Bluetooth Mobile Phones - JVC KW-NSX700 Mode D'emploi

Deleting the phone number entries
in the unit
1
Display the preset list/phone book/call
list you want to delete.
2
• You cannot delete data when [Phone] is
selected.
3
Select the item you want to delete.
Deletes all the numbers/names in the selected list
A confirmation message appears. Press [Yes].

Settings for using Bluetooth mobile phones

• You can also display the setup screen by pressing
Menu items Selectable setting/item
Auto On
♦
Answer ♦ Off
SMS Notify ♦ On
♦ Off
Ring Mode ♦ System
Phone
♦
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for received
Change calls and SMS from <Tone1>, <Tone2>, <Tone3>.
Call Tone
♦
♦ Message Tone
(☞ page 58)
or
on the monitor panel.
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the calls manually.
: The unit informs you of the arrival of a message by ringing and displaying
"Receiving Message."
: The unit does not inform you of the arrival of a message.
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not work
depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
60
About mobile phones compatible
with Phone Book Access Profile (PBAP)
If your mobile phone supports PBAP, the phone
book and call lists are automatically copied to the
unit when the mobile phone is connected.
• Phone book: up to 5 000 entries
• Dialed calls, received calls, and missed calls: up to
50 entries each
To display the phone book/call lists of
the mobile phone or the unit
Connected mobile phone
This unit
Initial: Underlined