Using Other External Components; Front Aux (Only For Kw-Nsx600); Av-In - JVC KW-NSX700 Mode D'emploi

Using other external components

• When the operation buttons are not displayed on the screen, press FNC on the monitor
panel or touch the area shown on the illustration. To hide the operation buttons, press
FNC on the monitor panel.
• To change settings for video playback, ☞ page 43.
Source type ("AV-IN" or
"Front AUX"*
[Mode] 1 Changes the AV-IN name.
*
• Press [2] or [3] to select an AV-IN name.
[HOME] Displays the <HOME> screen.
* 1 Appears when "AV-IN" is selected as the source.
* 2 Only for KW-NSX600.
Front AUX
(Only for KW-NSX600)
1
Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2
Select "Front AUX" as the source.
(☞ page 12)
3
Turn on the connected component and
start playing the source.
( ☞ below)
1
AV-IN name*
2
)
1
*
34

AV-IN

You can connect external components to the LINE IN/
VIDEO IN jacks. (☞ page 73 )
Preparation:
Select [AV-IN] for <AV Input>. (☞ page 48)
• <AV Input> can be changed only when <Input>
in <Display Input> is set to [Smartphone] or
[Off].
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
(☞ page 12)