Setting Up Bluetooth - JVC KW-NSX700 Mode D'emploi

Setting up Bluetooth

To display the <Bluetooth Setup> screen, ☞ page 53.
Menu items Selectable setting/item
Phone Connection
♦
♦
Phone Device Shows the phone device name.
Audio Connection ♦
♦
Audio Device Shows the audio device name.
Pandora Connection
♦
♦
Pandora Device Shows the Pandora device name.
PIN Code Changes the PIN code of the unit. (☞ page 53)
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
Auto Connect ♦
♦
HF/Audio Output Select the speakers used for Bluetooth (both phone use and audio player).
♦
♦
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list
and call lists.
: ☞ page 54
Connect
: ☞ page 54
Disconnect
: ☞ page 54
Connect
: ☞ page 54
Disconnect
: ☞ page 54
Connect
: ☞ page 54
Disconnect
On : The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
Off : Cancels.
: From front speakers only.
Front
All : From all speakers.
55
Initial: Underlined