Disc Operations; Playing A Disc - JVC KW-NSX700 Mode D'emploi

Disc operations

Playing a disc

• If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
Inserting a disc
KW-NSX700
To open the panel, ☞ page 10.
Label side
KW-NSX600
Label side
The source changes to "DISC" and playback starts.
• The DISC IN ( ) indicator lights up while a
disc is inserted.
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing " ,"
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
Ejecting a disc
KW-NSX700
Press [Eject] on the
<Open/Tilt> screen
(☞ page 10)
• You can eject a disc when playing another AV source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
• If the disc cannot be ejected, ☞ page 3.
When removing a disc, pull it horizontally.
Prohibiting disc ejection
Press FNC and 0 on the monitor panel at the same
time.
KW-NSX700
KW-NSX600
To cancel the prohibition, repeat the same procedure
to select [Eject OK?].
17
KW-NSX600
+
+