Usb Operations; Playing A Usb Device; Connecting A Usb Device - JVC KW-NSX700 Mode D'emploi

Masquer les pouces Voir aussi pour KW-NSX700:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USB operations

Playing a USB device

• This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/
WAV files stored in a USB mass storage class device.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• Make sure all important data has been backed up to
avoid losing the data.
* Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).

Connecting a USB device

You can connect a USB mass storage class device such as
a USB memory, Digital Audio Player, etc. to the unit.
The source changes to "USB" and playback starts.
• All tracks in the USB device will be played repeatedly
until you change the source.
USB cable from the rear
of the unit
24
Cautions:
• This unit may not play back files in a USB device
properly when using a USB extension cable.
• USB devices equipped with special functions such as
data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• This unit cannot recognize a USB device whose rating
is other than 5 V and exceeds 1 A.
• This unit may not recognize a memory card inserted
into the USB card reader.
• Connect only one USB device to the unit at a time. Do
not use a USB hub.
• When connecting with a USB cable, use the USB 2.0
cable.
• The maximum number of characters (when the
characters are 1 byte):
– Folder names: 50 characters
– File names: 50 characters
• Avoid using the USB device if it might effect driving
safety.
• Do not pull out and connect the USB device
repeatedly while "Now Reading" is shown on the
screen.
• Electrostatic shock at connecting a USB device may
cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and
the USB device.
• Operation and power supply may not work as
intended for some USB devices.
• Do not leave a USB device in the car, or expose
to direct sunlight or high temperature to avoid
deformation or damage to the device.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kw-nsx600

Table des Matières