Using A Rear View Camera - JVC KW-NSX700 Mode D'emploi

Using a rear view camera

• To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view
camera, ☞ page 73 .
Activating the rear view camera
1
On <HOME> screen:
2
To deactivate, select [Off].
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view
camera manually
On <HOME> screen:
When displaying the picture from the rear view
camera manually, you can change the settings of the
☞
picture. ( pages 43 and 45)
To erase the rear view screen
KW-NSX700
46
KW-NSX600