Adjusting The Crossover Frequency - JVC KW-NSX700 Mode D'emploi

Adjusting the sound precisely
1 1
Perform steps
preset sound mode," then...
2
Select a band.
3
Adjust the sound.
Reset Changes level of Low/Mid/
High to 0.
Freq Selects frequency.
Q Adjusts the width of the
frequency.*
Bass Activates/deactivates bass.*
SW Level Adjusts subwoofer level.
The adjustments are overwritten if <User>
setting has been made (☞ page 39), and <User>
is activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
2 3
steps and .
1
* Fixed for "High" band.
2
* Only for "Low" band.
2
and of "Selecting a
1
2
Adjusting the crossover
frequency
1
On <HOME> screen:
2
3
Select the item to adjust, then make
adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Adjusts the crossover for subwoofer (low pass filter).
Adjusts the crossover frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.
* Not selectable when <Freq> is set to <Through>.
40