Clock; Childproof Lock; Changing The Basic Settings - Siemens HQ738256E Notice D'utilisation

Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the timer,
V x
clock, press the button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.

Clock

After connecting the appliance to the mains or after a power
cut, the symbol and three zeros flash in the display. Set the
0
clock.
Press the button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the N arrow is next to

Childproof lock

The oven has a childproof lock to prevent children from
switching it on by accident.
The oven will not respond to any settings.You can still set the
clock and the timer when the childproof lock is activated.
If the type of heating and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Note: If a hob is connected, it will not be affected by the
childproof lock on the oven.

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting Selection 1 Selection 2 Selection 3
c1 Clock display always*
c2 Signal duration approx.
upon completion of 10 seconds
a cooking time or
timer period
c3 Waiting time until a approx.
setting is applied 2 seconds
* Factory setting
No other time-setting option should have been set.
30
arrow.
N
cooking time, end time or
y
arrow is next
N
0 .
only with -
the but-
0
ton
approx. approx.
2 minutes* 5 minutes
approx. approx.
5 seconds* 10 seconds
Use the or
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
0
Press the button four times.
0
1.
The time symbols light up in the display and the
next to 0 .
Use the or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Activating the childproof lock
No cooking time or end time should be set.
Press and hold the
The @ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the
The symbol goes out in the display. The childproof lock is
@
deactivated.
Press and hold the
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the or
@
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the or
@
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
button to set the clock.
A
button to change the clock.
A
button for approx. four seconds.
@
button for approx. four seconds.
@
button for approx. 4 seconds.
0
button to change the basic setting.
A
button.
0
0 button and change the setting
button.
A
0 button for approx. 4 seconds.
arrow is
N