Setting The Time-Setting Options; Timer - Siemens HQ738256E Notice D'utilisation

Removing the rotary spit
:
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
:
Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
Open the appliance door carefully.
1.
Using the metal hook, pull the rotary spit to the right out of
2.
the motor mount.

Setting the time-setting options

Your oven has various time-setting options. You can use the
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The N arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed direction with the
next to the relevant time symbol.

Timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
Press the button once.
0
1.
The time symbols light up in the display and the
next to .
V
Use the @ or A button to set the timer duration.
2.
Default value for button = 10 minutes
@
Default value for A button = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The symbol lights up in the display and the timer
NV
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
button to switch off the timer.
28
@ or A button when the N
N
Pull the rotary spit shelf halfway out of the oven.
3.
Hold the rotary spit in place on the left-hand side with an oven
4.
glove and screw the handle onto the rotary spit.
Lift the rotary spit carefully out of the rotary spit shelf.
5.
Remove the rotary spit shelf and the baking tray from the
6.
oven.
0
Changing the timer duration
Use the or
@
seconds, the change is adopted.
Cancelling the timer duration
arrow is
Use the button to reset the timer duration to 0:00. The
A
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
arrow is
clock, press the
to the relevant symbol. The display shows the value for a few
seconds.
0
button to change the timer duration. After a few
A
N
timer, cooking time,
V x
button repeatedly until the
0
arrow.
end time or
y 0
arrow is next
N