JVC RX-DP20VBK Manuel D'instructions page 79

To change the transmittable signals for
operating another manufacturer's DVD player
1. Press and hold AUDIO
(STANDBY).
2. Press DVD.
Remote's display
3. Enter a manufacturer's code using
buttons 1–9, and 0.
See page 77 to find the code.
4. Release AUDIO (STANDBY).
After pressing DVD (or DVD MULTI only for Zone 1
operation), you can perform the following operations on a DVD
player:
1–9, 0, +10 : Selects the titles or the chapters.
PLAY : Starts playing.
4
: Returns to the beginning of the current (or
previous) chapter.
¢
: Skips to the beginning of the next chapter.
STOP
: Stops playing.
PAUSE : Stops playing temporarily. To release, press
PLAY.
After pressing DVD MENU, these
buttons can be used for the
DVD menu operations.
Note:
Refer also to the manual supplied for your DVD player (and the
instructions supplied for the discs).
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
To change the transmittable signals for
operating another manufacturer's CD player
1. Press and hold AUDIO (ON).
2. Press CD.
Remote's display
STANDBY
DVD
1 2
4 5
7 8
/P
10 0
RETURN FM MODE
SET
DVD
MENU
STANDBY
ON
CD
3. Enter a manufacturer's code using
buttons 1–9, and 0.
See page 77 to find the code.
ON
4. Release AUDIO (ON).
After pressing CD, you can perform the following operations on
a CD player:
1–9, 0, +10
: Selects the tracks.
PLAY : Starts playing.
EFFECT
REW
: Fast-reverses the tracks.
3
LIVENESS
FF : Fast-forwards the tracks.
6
STOP
: Stops playing.
9
PAUSE : Stops playing temporarily. To release, press
PLAY.
+ 10
100 +
Note:
Refer to the manual supplied for your CD player.
5. Try to operate your CD player by pressing one of
the above buttons.
• DO NOT forget to turn on the CD player before pressing one
of the above buttons.
If more than one code is listed for your brand of CD, try each
one until the correct one is entered.
Manufactures' codes for TV
Manufacturer
JVC
Akai
Blaupunkt
Fisher
Grundig
Hitachi
Irradio
ITT/Nokia
Loewe
Magnavox
Matsushita
Mets
Mitsubishi
Mivar
NEC
Nordmende
Okano
Panasonic
Philips
Pioneer
RCA/Proscan
SABA
Samsung
Sanyo
Schneider
Sharp
Sony
Telefunken
Thomson
Toshiba
Zenith
*This figure is set to the remote control as the initial JVC code.
1
4
7
/P
10
RETURN
Codes
00*, 13, 74
01, 02
03, 04
01, 05
03, 06, 07
08, 09, 10, 49, 78
02
11, 12
06, 15, 16
08, 17, 49
86, 87
50, 51, 52, 53
08, 18, 19, 20
21
83
22, 23
15
24, 25, 26, 27, 76
15, 17, 28, 75
85
08, 24, 29, 30, 31, 48
32, 33, 68, 69, 70
06, 08, 16, 34, 35, 49
01, 05, 81
02, 15, 36
37, 38, 77, 88
39, 80
40, 41, 42, 69
71, 72
37, 43, 44, 79
45, 46
EFFECT
2 3
LIVENESS
5 6
8 9
0 + 10
100 +
FM MODE
76