Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Battery Charging
•
Battery charging must take place when the device is not in use
•
Charging starts automatically when power plug is connected to 230V wall socket. Green light on the control
box will turn on, once the power plug is connected.
Control box
Wiring:
The door on the control box can be opened with a thumb grip.
1.
Battery outlet.
2.
Hand control connector.
3.
Connector for actuator up/down.
4.
Connector for main cable.
(NOTE: Mains cable must always be connected to the
control box for IP classification to be valid.)
Trouble shooting
If the lifting function cannot be activated, check the following:
•
That all cables are properly and securely connected. Pull out the contact and plug it in again firmly.
•
That battery charging is not in progress.
•
That the battery is charged.
If the device is not working properly, contact your distributor.
If the device makes unusual noises:
•
Try to determine the source of the sound. Take the device out of operation and contact your distributor.
Accessories
Art. Nr.
Description
56-334
Drip holder
56-336-4
Oxygen holder
56-337
Side support, adjustable
56-338
Drip rod complete with attachment
56-389
Soft basket with attachment
56-339-1-0
Handbrake kit/2 handles
56-339-1-1
Handbrake kit/one-handed brake
I F U
7
Publicité
Table des Matières
