DHG Bure XL SystemRoMedic Mode D'emploi page 6

Before first use:
• Inspect the packaging for any damage.
• Check for correct product being delivered.
• Check to ensure that the device is free from damage.
• Check if all the parts/components are included in the package.
• Check if all approved accessories are included in the package.
• Check if Product Quality Approval document is included in the packaging. Save this document for future
contact with manufacturer.
• Make certain the device is properly assembled.
• Check lifting function and bottom-frame adjustment function.
• Check if it is possible to move the device in all directions.
3. Using Bure Walker
Standing up and walk training
1. Ask the user to sit on the edge of the bed or chair. Bring out the walking table and place it in front of the user.
Lock the brakes on the wheels.
2. Ask the user to place their arms on the armrests. If necessary, ask the user to move forward on the seat base
so that the user reaches the handles.
3. Ask the user to lean forward. To start raising the walking table, press the UP button on the controller. Raise
the walking table to a desired height.
4. Unlock the brakes. Adjust the height of the walking table to a desired position
5. Assist the user while walk training.
Raising/Lowering the Frame
Adjust the height with the aid of the remote control UP and DOWN arrows.
Adjusting the Handles
To adjust handles to the desired position; loosen screw, adjust
handle, tighten screw.
Left and Right Adjustment of Armrests
The armrests can be adjusted sideways for optimal support; loosen screw,
adjust armrest, tighten screw.
Locking/Unlocking Castors wheels
The device is equipped with lockable / braked castor wheels. Lock the
wheels by pressing the green pedal brake down with your foot. To release
the break, press the green protruding part with your foot.
6 I F U