battioni Pagani BLM Notice D'emploi Et D'entretien page 42

instruction manual
for use and maintenance of BLM series
The Battioni Pagani vacuum/pressure blowers pumps were designed and constructed in compliance with the EEC safety regulations and were
®
assessed for risks according to the standard UNI EN ISO 12100:2010; in particular they are in conformity with directive 2006/42/CE and subsequent
modifications and additions.
Since the design of this pump complies with the definition of a machine as contained in the Machinery Directive 2006/42/EC, the pump bears the
CE mark on its identification plate. However, it must be pointed out that because of its application and the purpose for which it is supplied, which
specifies that it be installed by the buyer (without motive power), Battioni Pagani
operation and maintenance manual are not followed.
This manual contains the Declaration of CE conformity and all the instructions required by users, and by the manufacturers of plant systems,
for using our products safely. As a result, the manual must always be kept near the BLM vacuum/pressure blowers pump. Carefully read the
instructions contained in this manual before proceeding with any operation with and on the BLM vacuum/pressure blowers pump.
This danger symbol in the manual means that important instructions relating to safety are being provided. Operators are the
first recipients of this information and are responsible for compliance, not only in relation to themselves, but also in relation to
other persons exposed to the risks associated with use.
The descriptions and illustrations in this manual are purely indicative.
The manufacturer reserves the right to make any type of change to this manual at any time.
At the moment of receiving the vacuum/pressure blowers pump, check that it is complete with all its parts.
Any anomalies or missing parts must be communicated within 8 days of receipt of the product.
The Supplier guarantees that the product sold is free from defects and undertakes to repair or, by final decision, to replace the faulty parts only if
the defects are clearly attributed to the manufacturing process or to the materials used. In any case the costs of labour, travel and transport, and any
customs expenses, shall be paid by the Purchaser. The vendor is not obliged to pay damages except in the case of fraud or serious offence.
All parts subject to normal wear are excluded from the warranty. The warranty will cease to be valid if:
• the faults reported are the result of accidents or obvious carelessness or negligence by the Purchaser,
• the parts have been modified, repaired or fitted by persons not authorised by the vendor,
• the failures and breakages have been caused by use that is unsuitable or heavier than that provided for by the vendor.
• the Purchaser has failed to make the payments as agreed under the contract.
The warranty rights of the Purchaser are invalidated where the same does not report to the Vendor any defects within 8 days of discovery,
notwithstanding the provisions of art. 1512 of the Italian Civil Code. The Vendor reserves the right to make changes or improvements to its
products without any obligation to make such changes or improvements to the units already previously produced and/or delivered. The Vendor
reserves the right to make changes or improvements to his/her products without being obliged to make the same changes or improvements to the
units already produced and/or delivered previously.
Thank you for choosing Battioni Pagani
page 20
FOREWORD
WARRANTY
.
®
refuses any and all responsibility if the instructions in this
®