Kärcher SB VC 1 Mode D'emploi page 23

1 Double casing suction hose
2 Fibreglass rod
3 Sponge rubber seal
4 Suction hose intake
 Insert the fibreglass rod, double casing
suction hose and sponge rubber seal
into the suction hose intake.
Note
The sponge rubber seal must be inserted
flush in the suction hose intake.
1 Rotating ring
2 Screw
3 Double casing suction hose
4 Thread in rotary ring
 Fit the opened rotary ring around the
double casing suction hose.
 Close the rotary ring and secure with
the screw.
1 Rotating ring
2 Double casing suction hose
 Pull the double casing suction hose
downwards slightly.
 Manually turn the rotary ring upwards
so that the double casing suction hose
is tensioned between the interior and
exterior.
1 Car vacuuming tool
2 Threaded ring
3 Automatic nozzle anti-theft device
4 Tensioning ring
5 Operator suction hose
 Adjust the length of the operator suction
hose.
 Mount the tensioning ring, threaded ring
and automatic nozzle anti-theft device
on the operator suction hose and attach
to the automatic nozzle.
– 4
EN 23