Changing The Control Panel Angle; Detaching The Control Panel; Attaching The Control Panel - JVC EXAD KD-LHX601 Manuel D'instructions

Changing the control panel
angle
You can change the angle of the control panel to
four positions.
1
Press and hold
angle adjustment screen appears.
There is a time limit in doing the following
procedure. While Time countdown indicator
appears, perform the following procedure.
2
Press (angle) repeatedly to adjust
the angle to the position you want.
The control panel angles changes as follows:
CAUTION:
NEVER insert your finger in between the
control panel and the unit, as it may get
caught or hurt.
Note:
If you turn the power off, the control panel
automatically returns to the closed position. Next time
you turn on the power, the control panel moves to its
previous position.
(angle) until the
Time countdown indicator

Detaching the control panel

You can detach the control panel when leaving
the car.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1
2
3

Attaching the control panel

1
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with
a cotton swab or
cloth moistened
with alcohol,
being careful not
to damage the
connectors.
2
Connectors
61