JVC EXAD KD-LHX601 Manuel D'instructions page 18

7 When the current source is other than FM
or DAB, the TP indicator lights up.
If a station (or service) starts broadcasting a
traffic announcement, "Traffic News" appears
on the display, and this unit automatically
changes the source and tunes in to the station
(or service).
Note:
See also "Traffic News Standby Reception" on page
27.
Using PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from any source except AM
stations.
• See also "Using PTY Standby Reception" on
page 29.
To select your favorite PTY code for PTY
Standby Reception
When shipped from factory, PTY Standby
Reception has been set to search for "News"
programmes.
You can select your favorite programme type for
PTY Standby Reception.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 53 and 54.)
2
Press number button 4 to select
"TUNER"—Tuner category of the
PSM settings.
The "PTY Stnby" (standby) setting screen
appears on the display.
18
3
Select one of the twenty-nine PTY
codes. (See page 22.)
4
Finish the setting.
To set PTY Standby Reception
1
Press M (MODE) while listening to an FM
broadcast (or a DAB service).
"Mode" appears on the display.
The next-step-operation buttons
start flashing.
2
Press number button 3 to activate PTY
Standby Reception while "Mode" is still on the
display.
Each time you press the button, PTY Standby
Reception turns on and off alternately.
Ex.: When the currently selected PTY code
for PTY Standby Reception is "News"
After about
5 seconds
The display returns to the source indication
screen.
PTY indicator appears.
(either lights up or flashes)
Selected code name
appears on the display
and is stored into
memory.