Rear Brake Pedal; Clutch Lever; Brake Lever - Benelli BN600GT Manuel D'utilisateur

CLUTCH LEVER

The clutch lever is located on the dial on
the left of the handlebar. To release the
clutch, pull the lever towards the dial. To
engage the clutch, release the lever.
To guarantee good clutch action, pull the
lever quickly and release it slowly.
To adjust the clutch lever, see the main-
tenance chapter.

BRAKE LEVER

The brake lever is located on the dial on
the right of the handlebar. To engage the
front brake, pull the lever towards the
dial.
The brake lever has a position adjust-
ment knob "1" To adjust the distance
between the brake lever and the accel-
erator dial, turn the knob clockwise or
anticlockwise; anticlockwise will move
the lever closer, while clockwise will
move it further away. Make sure that the
correct adjustment, set from the adjust-
ment gauge is in line with the brake le-
ver reference "2".
81
2
1

REAR BRAKE PEDAL

The brake pedal is on the right side of
the motorbike. To enable the rear brake,-
press the brake pedal.
EN