Technical Data - EINHELL CC-PO 1100/1 E Instructions D'origine

generate harmful or toxic dust
•
Sharpening, engraving with corresponding
attachments
•
Working on materials containing asbestos
•
Use in areas where there is a risk of explosion
•
Sanding on damp walls
There is a risk of injury.
The user of the device is liable for all damage to
property and personal injuries arising as a result
of incorrect use.
If any other components or non-original
components are used on the machine, the
manufacturer's guarantee shall become void.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
•
Contact with the unguarded wheel (injuries
through cutting)
•
Reaching into the wheel while it is still rotating
(injuries through cutting)
•
Catapulting of parts of the wheel (injuries
through cutting or bruising)
•
Catapulting of parts of the material being pro-
cessed (injuries through cutting or bruising)
•
Risk of fire from flying sparks
•
Damage to hearing if the compulsory hearing
protection is not used (hearing loss)
•
Inhalation of abrasive particles from the mate-
rial and wheel
•
Electric shock upon contact with non-insula-
ted electrical parts
If the instructions listed in the operating instruc-
tions are not adhered to, improper handling of the
equipment may result in other residual risks

4. Technical data

Voltage: .......................................... 230 V ~ 50 Hz
Power rating: ............................................ 1100 W
Speed n: .....................................1000-3500 min
Polishing / sanding disk diameter: .......... 180 mm
Anl_CC_PO_1100_1_E_SPK9.indb 17 Anl_CC_PO_1100_1_E_SPK9.indb 17
GB
Connection thread: ....................................... M14
Protection class: ............................................ II/
Weight: .......................................................2.6 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 86 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 97 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60745.
Operating mode: Sanding with sanding paper
Vibration emission value a
K uncertainty = 1.5 m/s
Operating mode: Polishing
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
-1
•
Wear protective gloves.
- 17 -
= 13.47 m/s
2
h,DS
2
= 11.55 m/s
2
h,P
2
13.02.2020 09:53:29 13.02.2020 09:53:29