Storing Stations In Memory; Manual Presetting - JVC KD-SH1000 Manuel D'instructions

When an FM stereo broadcast is hard
to receive
1
Enter the MODE menu (see page 4).
2
3
4
MO indicator lights up.
Reception improves, but stereo
effect will be lost.
To restore the stereo effect, repeat the same
procedure and select "Off" in step 3. The MO
indicator goes off.
Tuning in to FM stations with strong
signals only—LO (local)/DX (Distance-
Extreme)
1
Enter the MODE menu (see page 4).
2
3
4
DX indicator goes off and LO
indicator lights up.
Only stations with sufficient
signal strength will be detected.
To tune in to all receivable stations, repeat the
same procedure and select "DX" in step 3. The
LO indicator goes off and DX indicator lights
up.

Storing stations in memory

You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you
want to store into.
2
Enter the MODE menu (see page 4).
3
4
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Enter the MODE menu (see page 4).
• If you hold down 5/∞, the Preset Station
List appears (go to step 6).
Continued on the next page
9