Storing User Channels In Memory - JVC KD-SH1000 Manuel D'instructions

In Channel Search, channel name and
channel number appear on the display
during search.
• While searching, invalid and unsubscribed
channels are skipped.
Checking the XM Satellite radio ID
While selecting "XM1," "XM2," or
"XM3," select "Channel 0."
The display alternately shows "RADIO ID" and
the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."

Storing user channels in memory

You can preset six channels for each band.
Ex.: Storing a SIRIUS channel into preset
number 4 of the SR1 band.
1
2
• Holding the button displays the User
Preset Channel List (see step 6 on the
right column).
3
Enter the MODE menu (see page 4).
4
Select "Preset."
5
6
Select a user preset number.
• You can move to the lists of the other SIRIUS
bands by turning the control dial.
7
Store the channel.
Listening to a user preset channel
1
2
• Holding this button displays the User
Preset Channel List (see step 6 above).
3
3
Perform steps
column) to select a user preset
channel.
4
Finish the procedure.
6
to (on the left
27