Programming The Change Filter Reminder; Programming The Clearray® (Ultraviolet) Water Purification System - Sundance Spas Altamar 880 Serie Mode D'emploi

880 SERIES
12.7

Programming the Change Filter Reminder

Your new hot tub is equipped with a programmable "Change Filter"
reminder icon that flashes on the control panel display after a
specified number of days. It is designed to remind you to perform
routine filter system maintenance on a regular basis but does not affect
hot tub operation in any way. The "Change Filter" reminder icon must be
reset at each interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 30 days
(1 month) to remind you of this important maintenance step.
Note: This reminder must be reset at each filter inspection/replacement
interval. Refer to Section 13.1 for filter replacement instructions.
Programming Instructions
1. Press the (CYCLE)
Standard Mode, six times in Economy Mode.
The main display reads "FIL" indicating the
"Change Filter" display program has been
accessed.
2. Press (SELECT)
programmed duration or to view days elapsed since last filter
cleaning interval.
3. Press (UP)
change duration setting as follows: 0 - 10 - 20 -
30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120
- OFF.
Note: Selecting "0" forces the Change Filter reminder icon to stay on
indefinitely.
4. Press (DISPLAY)
the standard water temperature display.
Note: If no button is pressed within 30 seconds, all changes are
recorded and the screen automatically returns to the standard water
temperature display.
12.8 Programming the CLEARRAY® (Ultraviolet) Water
Purification System
To access the programming options follow the step below.
• Standard Mode - in this mode, press the (CYCLE)
times;
• Economy Mode - in this mode, press the (CYCLE)
seven times to enter the programming mode.
The LCD screen will display "U." At this time the system is ready to
accept your changes.
1. Press the (SELECT)
CLEARRAY System appears on the LCD display, either "ON" or
"OFF."
Page 58
button two times in
button once to display the currently
or (DOWN)
button once to save changes and return to
button once. The current status of the
button to
button three
button