Adjusting Time Of Day; Programming The Date - Sundance Spas Altamar 880 Serie Mode D'emploi

880 SERIES
2. Press (CYCLE)
cycles start time. With each press, the currently programmed status
will be shown in the large four digit display. To adjust any displayed
value, simply press the (UP)
3. Press (SELECT)
Time to Duration, with each press, the currently programmed
duration will be shown in the large four-digit display. Press (UP)
or (DOWN)
of 15 minutes.
4. Press (DISPLAY)
water temperature display.
Note: If no button is pressed within 30 seconds, all changes are
recorded and the screen automatically returns to the standard water
temperature display.
When a programmed filter/heating cycle activates, the LCD screen
displays the following message:
*
At any time, you may check the programming of any economy mode
filter/heating cycle by first pressing (CYCLE)
through the menu by pressing either (CYCLE)
button. The programming is changed only by pressing (UP)
(DOWN)
12.3

Adjusting Time of Day

The control system remembers the time of day even in the event of a
prolonged power outage. However, it may occasionally be necessary
to reset the time of day. To accomplish this, press (DISPLAY)
(MODE) , and (DISPLAY)
number representing the hour will be displayed, followed by AM or PM.
The hour will advance or decrease each time the (UP)
button is pressed within five seconds. Then, press the (DISPLAY)
button again to display minutes. Adjust minutes as necessary by
pressing the (UP)
display will return to normal and save your settings.
12.4

Programming The Date

The control system allows you program the month, day, year, and day of
the week. To accomplish this, press (DISPLAY)
, and (DISPLAY)
current hour setting will be displayed, followed by AM or PM. Then,
press the (DISPLAY)
Page 56
button to display and adjust each subsequent
button to move down the menu from Start
button to adjust the duration in increments
button to save changes and recall the main
*Note: Number will vary
according to which filter
cycle is being programmed.
buttons during this process.
or (DOWN)
button within five seconds each. The
button again to display minutes. Press the
or (DOWN)
button then moving
or (SELECT)
button within five seconds each. A
button. After 5 seconds, the
button.
or
,
or (DOWN)
, (MODE)