Sundance Spas Altamar 880 Serie Mode D'emploi page 96

Masquer les pouces Voir aussi pour Altamar 880 Serie:
Table des Matières

Publicité

880 SERIES
B. Connecting Your Apple device/MP3 Player Using the USB:
1. Locate the USB port in the stereo locker (Figure B).
2. Use a 30-pin cable (purchased separately) for compatible devices
(Figure C) or a cable provided with your device.
3. Connect the USB end of the cable into the USB connection on
stereo.
4. Connect the 30-pin end of the cable to the Apple device/MP3 Player
(purchased separately), Figure D.
5. After connecting the cable to both devices, set the player into the
rubber holding base, Figure E.
Note: This also charges most compatible Apple devices when con-
nected.
USB
AUX
Figure B
CAUTION
MENT DAMAGE!
Never install, remove or operate any electrical device (e.g.
Apple device/MP3/USB/AUX/Bluetooth) while hands are wet
or while sitting partially or fully immersed in the spa!
Note: The DRM (Digital Rights Management) Files cannot be played
on this deck. Personal files (MP3, WMA, iTunes or AAC) can be
played as long as they are not DRM encrypted.
C. Operating Your USB/MP3/Apple device
1. Turn power "ON" to the stereo unit. Turn power "ON" to the remote.
2. The LCD screen on the remote will display the following: "Welcome,"
"USB," "Load," "Apple" (final display will vary depending on the
device connected). All functions are performed through the remote.
3. While the music is playing the remote screen will display and
continually scroll through the following: Artist, Album, Song and Track
information.
4. For operational functions refer to the "External Media Device
Playback" section.
Page 90
Figure C
(purchased
(device purchased
separately)
:
RISK OF ELECTRICAL SHOCK OR EQUIP-
Figure D
separately)
USB
AUX
ACCESSORY CONNECTED
Figure E

Publicité

Table des Matières
loading

Table des Matières