Yamaha YZ250F 2004 Manuel D'atelier Du Proprietaire page 494

Masquer les pouces Voir aussi pour YZ250F 2004:
Table des Matières

Publicité

È
É
FRONT BRAKE AND REAR BRAKE
5 - 20
4. Install:
[Front]
• Brake master cylinder kit 1
• Washer 2
• Circlip 3
• Brake master cylinder boot 4
To brake master cylinder 5.
[Rear]
• Brake master cylinder kit 1
• Push rod 2
• Circlip 3
• Brake master cylinder boot 4
To brake master cylinder 5.
NOTE:
• Apply the brake fluid on the brake master cyl-
inder kit.
• Apply the lithium soap base grease on the tip
of the push rod.
• When installing the circlip, use a long nose
circlip pliers.
È
Front
É
Rear
Front brake master cylinder
1. Install:
• Brake master cylinder 1
• Brake master cylinder bracket 2
• Bolt (brake master cylinder bracket) 3
9 Nm (0.9 m · kg, 6.5 ft · lb)
NOTE:
• Install the bracket so that the arrow mark a
face upward.
• First tighten the bolts on the upper side of the
brake master cylinder bracket, and then
tighten the bolts on the lower side.
CHAS

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Yz250ft 2004

Table des Matières