Table des Matières
Publicité
KICK SHAFT AND SHIFT SHAFT
Shift shaft
1. Install:
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in) a above the top of the
footrest.
Kick shaft assembly
1. Install:
NOTE:
• Apply the molybdenum disulfide oil on the
• Align the punch mark a on the ratchet wheel
2. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick shaft.
4 - 76
• Roller 1
• Collar 2
• Torsion spring 3
• Shift shaft 4
• Shift pedal 1
• Bolt (shift pedal) 2
12 Nm (1.2 m · kg, 8.7 ft · lb)
• Kick gear 1
• Washer 2
• Circlip 3
• Ratchet wheel 4
• Spring 5
• Washer 6
• Circlip 7
To kick shaft 8.
inner circumferences of the kick gear and
ratchet wheel.
with the punch mark b on the kick shaft.
• Torsion spring 1
To kick shaft 2.
ENG
Publicité
Table des Matières
