Table des Matières
Publicité
1 Brake master cylinder
2 Brake hose holder
3 Brake hose
CABLE ROUTING DIAGRAM
È Install the brake hose so that its pipe portion
directs as shown and lightly touches the projection
on the brake caliper.
É Pass the brake hose into the brake hose holders.
Ê If the brake hose contacts the spring (rear shock
absorber), correct its twist.
Ë Install the brake hose so that its pipe portion
directs as shown and lightly touches the projection
on the brake master cylinder.
2 - 21
SPEC
Publicité
Table des Matières
